# Optical Inspection Records and Certificates of Conformance for Optics Makers > Source: https://netray.co/resources/optical-inspection-records-and-certificates-of-conformance > Publisher: Netray (netray.co), AI and integration engineering for ERP and manufacturing systems. > Section: Knowledge Base ## Short answer What optics makers should record for quality: interferometer data, scratch-dig, centration, coating spectra, lot traceability and certificates of conformance. ## Category ai-automation ## Content **Intro:** Optics makers should keep, for each lot or serial, the substrate certificate, process route, interferometer or profilometer results, scratch-dig and centration inspection, coating spectral data, the operator and equipment calibration status, and a certificate of conformance that matches those records. The challenge is that this data lives in instrument files, paper travelers and email. When a customer, ISO 9001 or AS9100 auditor asks for the history of a part, the answer should be a lookup. This guide lists what to capture and how to connect it. **Sections:** #### What Customers and Auditors Ask For **Body:** Typical requests include proof that material is what the print says, evidence that figure and surface quality meet the specification, coating performance curves, and traceability to calibrated equipment. Medical, defense and laser customers may add lot-level traceability and restrictions on changes. Under ISO 9001 and AS9100, the shop must also show control of nonconforming product and corrective action. If records are scattered, each request becomes a scramble. **Bullets:** - Substrate lot and vendor certificate - Inspection data for each characteristic on the print - Coating run record and spectral curve - Equipment ID and calibration due date at time of use - Nonconformance and disposition history #### Instrument Data and the Job Record **Body:** Interferometer maps, profilometer traces and spectrophotometer curves are generated on instrument PCs and often saved with filenames chosen by the operator. Establish a naming convention that includes job number, serial or lot, surface and date, and store files in a controlled location. The ERP or quality system should hold a link, not necessarily the file itself. Without a consistent link, finding a measurement for a part shipped last year is slow and error-prone. #### Certificates of Conformance That Match Reality **Body:** A CoC should state what was supplied and to what specification, and it should be generated from actual records, not retyped from the customer order. Retyping introduces errors and makes it easy to claim a specification that was not actually verified. If you attach inspection data, make sure it is the data for the shipped lot. Decide which statements your shop can truthfully certify and use template language reviewed by quality management. #### Calibration and Nonconformance Records **Body:** Interferometers, test plates, gauges and spectrophotometers need calibration records and due dates. A measurement taken with an out-of-calibration instrument can trigger a lookback across many parts. Link instruments to measurements so a lookback is a query. Nonconformances should capture the cause, the disposition and whether the finding was caught before or after coating, since the cost differs and so does the corrective action. #### Where AI Helps and Its Limits **Body:** AI can search across inspection files, travelers and certificates to assemble the history of a serial number, draft a CoC from verified records and flag missing data before shipment. It must not invent data or approve conformance. A person responsible for quality signs the CoC. If you ship a small number of standard parts with simple records, a disciplined folder structure and a template may be sufficient. **Cta:** Netray can index your ERP, travelers and instrument file shares on-prem so a quality manager can ask for the full record of a lot and see the sources. **Faq:** #### What should an optics certificate of conformance include? **Answer:** At minimum the part number and revision, quantity, lot or serial, the specifications met, and a statement by an authorized person. Many customers also expect reference to substrate certification, inspection results and coating data. Include only statements you have verified and can support with records. #### How long should optics inspection records be kept? **Answer:** It depends on customer contract, industry and standard. Defense, aerospace and medical customers often require retention for years after delivery. Check your contracts and quality manual, and apply the longest applicable requirement to the shared record system. #### Can AI generate a CoC? **Answer:** It can draft one from verified records and highlight missing items, which saves time and reduces typing errors. A qualified person must review and sign it. AI should never certify conformance on its own or fill gaps in the data. ## Related Slugs - syteline-first-article-inspection-guide - first-article-inspection-cost-in-aerospace-quote - as9100-contract-review-checklist-machine-shop - ai-visual-inspection-manufacturing ## Search terms optics inspection records, certificate of conformance optics, interferometer data management, optical quality management system, ISO 9001 optics manufacturer, optics lot traceability --- Talk to an engineer: https://netray.co/contact?intent=erp_ai | Machine catalog: https://netray.co/agent/catalog.json