# What is MachineMetrics? Machine monitoring, integrations and alternatives

> Source: https://netray.co/software/machinemetrics
> Publisher: Netray (netray.co), AI and integration engineering for ERP and manufacturing systems.
> Section: Manufacturing Software Encyclopedia

## Short answer

MachineMetrics is a cloud-based machine monitoring and production analytics platform for discrete manufacturers. It connects to CNC machines and other equipment through an edge device, then shows real-time status, utilization, downtime reasons and production counts. Plants use it to understand where machine time is lost and to give supervisors and operators live visibility without manual data entry.

## Vendor

MachineMetrics

## Category

mes

## Aliases

- Machine Metrics
- MachineMetrics machine monitoring

## Overview

MachineMetrics focuses on turning machine signals into usable production information. An edge device connects to the controller of a CNC machine or other equipment, reads status, program, feed and spindle information, part counts and alarms, and sends the data to the cloud platform. From there the software calculates utilization, OEE style metrics, cycle times and downtime, and presents them in dashboards, shop floor displays and reports.

Operators and supervisors can add context to the machine data, for example selecting a downtime reason on a tablet, or tying running jobs to work orders. That context is what makes the numbers actionable: a machine that is idle for 40 minutes means little until you know whether it was waiting for material, a setup, an inspection or a missing program. The platform also supports alerts and workflows, so a stoppage can notify the right person.

In a stack, MachineMetrics typically sits alongside the ERP and sometimes alongside an MES. The ERP holds jobs, routings and standards, the monitoring layer measures what actually happens on each machine, and the two are compared. Many shops adopt it as a first step in digitizing production because it works with machines of mixed ages and brands, rather than requiring a full MES rollout.

## Best For

- CNC machine shops and job shops that want to measure real spindle and machine utilization
- Discrete manufacturers with a mix of new and legacy machines from several controller brands
- Operations teams starting a shop floor digitization program with machine data
- Plants chasing capacity before buying more machines
- Manufacturers needing evidence of cycle time, setup and downtime for continuous improvement

## Modules

### Edge connectivity

**Description:** Edge device that reads data from machine controllers and other equipment and forwards it to the platform.

### Real-time monitoring

**Description:** Live machine status, current program, part counts and alarms on dashboards and shop floor displays.

### Downtime and operator input

**Description:** Capture and categorization of downtime reasons, with operator prompts on tablets or stations.

### Production analytics

**Description:** Utilization, OEE style metrics, cycle time and trend analysis across machines, cells and shifts.

### Alerts and notifications

**Description:** Rules that notify people when machines stop, run slowly or hit conditions you define.

### Job and order tracking

**Description:** Association of machine activity with jobs or work orders to compare actual against expected performance.

### Open data access

**Description:** APIs and data export so machine data can feed other analytics, ERPs and data platforms.

## Deployment

MachineMetrics is delivered as a cloud service with an on-site edge device connected to each machine. Customers with strict data residency requirements should confirm where data is stored and what can be retained locally.

## Integrations

### Machine protocols

**Detail:** Connectivity to common CNC controllers using interfaces such as FANUC FOCAS, MTConnect, OPC UA and other controller specific protocols, depending on the machine.

### ERP

**Detail:** Job and work order data can be pulled in and production counts or times can be returned through APIs or file based exchange, depending on the ERP.

### APIs

**Detail:** Programmatic access to machine data, events and metrics for use in BI tools, data warehouses and custom applications.

### Analytics platforms

**Detail:** Exports and data feeds to BI and data platforms so machine data can be combined with quality and cost data.

### Digital I/O and sensors

**Detail:** Edge hardware can capture signals from older equipment that has no network accessible controller.

## Strengths

- Works across mixed machine brands and ages, including older equipment through I/O
- Quick time to first insight compared with a full MES rollout
- Clear focus on utilization, downtime and cycle time that shop floor leaders understand
- Operator input adds context to raw machine signals
- Open data access supports combining machine data with other systems

## Limitations

- It is a monitoring and analytics layer, not a replacement for scheduling, quality or full traceability systems
- Data quality depends on consistent operator input for downtime reasons
- Some controllers expose limited data, which restricts what can be measured
- Cloud delivery may not suit sites with strict offline or air-gap requirements

## Alternatives

- Ignition
- Tulip
- Siemens Opcenter Execution
- AVEVA MES
- Proficy
- ERP based shop floor data collection

## Ai Opportunities

- Summarizing weekly downtime and utilization patterns by machine, shift and part family into plain language
- Anomaly detection on cycle time and spindle signals to flag tool wear or process drift early
- Classifying free text downtime notes into consistent reason categories
- Comparing actual cycle times with ERP routing standards to propose standard updates for planner review
- Answering supervisor questions about a machine or job through a private assistant over exported machine data

## Selection Tips

- List your machines and controllers first and confirm the connection method for each one
- Decide what you will do with the data, such as setup reduction or capacity planning, before rolling out
- Design a short, consistent downtime reason list so operators actually use it
- Agree on the ERP link: job numbers, routing standards and where actuals will be stored
- Check network segmentation and security for the edge devices on the plant floor
- Pilot on a few machines, measure a baseline, then expand

## Faq

### What does MachineMetrics do?

**Answer:** MachineMetrics connects to machines, mainly CNC equipment, and collects status, part counts, cycle times and alarms in real time. It then shows utilization, downtime and production performance so manufacturers can find lost machine time and make decisions based on actual data.

### Is MachineMetrics an MES?

**Answer:** It is better described as a machine monitoring and production analytics platform. It provides some execution style features such as job tracking and operator input, but it does not replace full MES functions like detailed scheduling, genealogy or electronic quality records.

### Can MachineMetrics connect to older machines?

**Answer:** Often yes. Machines with accessible controllers can be read directly, and older equipment may be connected through digital I/O signals. The depth of data varies by machine, so test your specific equipment before assuming full coverage.

### How does MachineMetrics work with an ERP?

**Answer:** The ERP normally holds jobs, routings and standards. MachineMetrics measures actual machine activity and can be linked to jobs so planned and actual performance are compared. Integration is usually done through APIs or file exchange, and the effort depends on your ERP.

### Does MachineMetrics have an API?

**Answer:** Yes, the platform offers programmatic access to machine data and events so you can send it to BI tools, data warehouses or custom applications. Confirm the current API scope, limits and authentication model with the vendor during evaluation.

## Search terms

what is machinemetrics, machinemetrics alternatives, machinemetrics api, machinemetrics pricing alternatives, machine monitoring software, cnc machine monitoring, machinemetrics vs ignition, machinemetrics integrations, oee software cnc, machinemetrics erp integration

---
Talk to an engineer: https://netray.co/contact?intent=erp_ai | Machine catalog: https://netray.co/agent/catalog.json