# 42Q Cloud MES and Oracle NetSuite: Work Orders Out, Production Data Back

> Source: https://netray.co/stack/42q-cloud-mes-oracle-netsuite
> Publisher: Netray (netray.co), AI and integration engineering for ERP and manufacturing systems.
> Section: ERP Stack

## Short answer

42Q Cloud MES, from Sanmina's 42Q, is a Built for NetSuite SuiteApp. NetSuite sends sales and work orders, BOMs and configuration parameters to the MES. The MES captures barcode scans, operator actions and test data on the factory floor and returns production performance data to NetSuite.

## Erp

Oracle NetSuite

## Erp Key

netsuite

## On Prem

false

## Product

42Q Cloud MES

## Vendor

42Q (Sanmina)

## Category

MES

## Integration

**Method:** Built for NetSuite SuiteApp

**Detail:** 42Q achieved Built for NetSuite status, per Sanmina's announcement. The SuiteApp handles the exchange: NetSuite as the source of orders, BOMs and configuration, and 42Q as the source of execution data.

**Method:** Order and BOM push, performance pull

**Detail:** Orders and BOMs move from NetSuite to 42Q, so shop-floor execution runs against ERP definitions. Production results, such as completions and quantities, return to NetSuite so inventory and cost reflect what was built.

## Data Flows

**From:** NetSuite

**To:** 42Q

**Data:** Sales orders and work orders

**Trigger:** On release

**From:** NetSuite

**To:** 42Q

**Data:** BOMs and configuration parameters

**Trigger:** On creation or change

**From:** 42Q

**To:** NetSuite

**Data:** Production performance data (completions, quantities)

**Trigger:** As operations complete or on schedule

**From:** Shop floor

**To:** 42Q

**Data:** Barcode scans, operator actions, test data

**Trigger:** During production

**From:** 42Q

**To:** Quality and engineering

**Data:** Test results and traceability

**Trigger:** On capture

## Setup

### Scope the plants and lines

**Detail:** Define which plants, lines and products start on 42Q, and whether they are discrete, serialized or test-heavy.

### Install the SuiteApp

**Detail:** Install through NetSuite and set integration roles and credentials for the exchange.

### Align master data

**Detail:** Clean item, BOM and routing data in NetSuite first. The MES enforces what the BOM says, so errors surface on the floor.

### Map statuses and quantities

**Detail:** Agree how work order statuses, completions, scrap and rework in 42Q map to NetSuite transactions.

### Configure floor stations

**Detail:** Set up scanning, operator login and test stations in 42Q and verify traceability data capture.

### Pilot one line

**Detail:** Run a line end to end, reconcile NetSuite inventory with 42Q counts, then expand.

## Pitfalls

- BOM revisions in NetSuite changing after a work order is released leave the MES running the old version.
- Scrap and rework recorded in 42Q not mapping cleanly to NetSuite adjustments, creating inventory differences.
- Serial or lot numbers captured in 42Q rejected by NetSuite because of format or duplicate rules.
- Timing gaps: completions reach NetSuite late, so planners see stale WIP.
- Overbuild and partial completions without an agreed rule about over-completion tolerance.
- Cloud connectivity loss at a plant interrupting execution if there is no offline plan.

## Ai Layer

### WIP and inventory reconciliation

**Description:** A private assistant can compare 42Q production counts to NetSuite work order completions and list orders where they disagree, with the likely cause.

### Genealogy questions

**Description:** Answer which lots and serials went into a finished unit by reading 42Q traceability data alongside NetSuite item receipts.

### Test failure patterns

**Description:** Summarize repeated test failures by station and BOM revision so engineering can look at the right place.

### Draft corrections for approval

**Description:** Propose adjustment transactions for mismatches. A person reviews and posts them.

## Alternatives

- NetSuite Manufacturing Mobile, if you need scanner-based labor and completion recording without a full MES.
- NetSuite Advanced Manufacturing with work order routing, for simpler discrete production.
- Other MES products with NetSuite connectors, evaluated on traceability, test data and multi-site needs.

## Faq

### What does NetSuite send to 42Q?

**Answer:** According to the integration description, sales and work orders, BOMs and configuration parameters. The MES then drives execution on the floor using those definitions.

### What comes back?

**Answer:** Production performance data from the factory floor. The exact transaction types written in NetSuite should be confirmed with 42Q during scoping.

### Is it cloud only?

**Answer:** The product is named 42Q Cloud MES. If a plant needs on-site or air-gapped operation, discuss deployment options with 42Q before committing.

### Where would private AI help?

**Answer:** Reconciling MES and ERP counts, tracing genealogy and summarizing test failures. It reads both systems and drafts any corrections for a person to approve.

## Source

https://www.sanmina.com/42q-achieves-built-for-netsuite-status/

## Search terms

42q mes netsuite, 42q cloud mes, netsuite mes integration, built for netsuite mes, sanmina 42q netsuite, netsuite shop floor execution

---
Talk to an engineer: https://netray.co/contact?intent=erp_ai | Machine catalog: https://netray.co/agent/catalog.json