# MRB Nonconformance Disposition Record Template (Aerospace) > Source: https://netray.co/tools/aerospace-mrb-nonconformance-disposition-record-template > Publisher: Netray (netray.co), AI and integration engineering for ERP and manufacturing systems. > Section: Free Tools ## Short answer A fill-in record for the material review board: nonconformance details, disposition, customer approval status and sign-offs. ## Category aerospace-defense ## Industry Aerospace ## Audience - Quality engineer - Material review board member - Design engineer ## Tool **Kind:** template **Output:** document **Fields:** #### Company name **Key:** company **Type:** text **Default:** Acme Aerostructures Ltd #### MRB record number **Key:** mrb_no **Type:** text **Default:** MRB-2026-0147 #### NCR number **Key:** ncr_no **Type:** text **Default:** NCR-26-0392 #### Date **Key:** date **Type:** date **Default:** 2026-10-20 #### Part number and revision **Key:** part_no **Type:** text **Default:** PN-48213 Rev C #### Quantity affected **Key:** qty **Type:** text **Default:** 4 of 24 #### Work order or lot **Key:** wo **Type:** text **Default:** WO-118204 / Lot 7731 #### Customer or program **Key:** customer **Type:** text **Default:** Wing bracket program #### Nonconformance description **Key:** description **Type:** textarea **Default:** Bore diameter measured 12.052 mm against a requirement of 12.000 to 12.025 mm on 4 pieces. Measured on CMM, report attached. #### Suspected cause **Key:** cause **Type:** textarea **Default:** Tool wear on finishing boring bar after extended run. Offset not adjusted at scheduled check. #### Proposed disposition **Key:** disposition **Type:** select **Options:** - Use as is - Repair - Rework to drawing - Scrap - Return to supplier **Default:** Rework to drawing #### Customer approval required **Key:** customer_approval **Type:** select **Options:** - No, within supplier authority - Yes, concession required - Yes, repair approval required **Default:** No, within supplier authority #### Technical justification **Key:** justification **Type:** textarea **Default:** Bore can be re-bored and sleeved to restore the drawing dimension without affecting wall thickness. Wall thickness remains above the minimum. **Blocks:** #### Material Review Board Disposition Record **Body:** Company: {{company}} MRB record: {{mrb_no}} NCR reference: {{ncr_no}} Date: {{date}} #### Part identification **Table:** **Columns:** - Item - Detail **Rows:** **0:** Part number and revision **1:** {{part_no}} **0:** Quantity affected **1:** {{qty}} **0:** Work order or lot **1:** {{wo}} **0:** Customer or program **1:** {{customer}} #### Nonconformance **Body:** {{description}} #### Suspected cause **Body:** {{cause}} #### Disposition **Body:** Proposed disposition: {{disposition}} Customer approval: {{customer_approval}} Technical justification: {{justification}} #### Containment and follow-up **Table:** **Columns:** - Action - Owner - Due date - Done **Rows:** **0:** Quarantine affected lot and tag **0:** Check other lots with the same tool or program **0:** Open corrective action if cause confirmed **0:** Update inspection records and traceability #### Approvals **Signatures:** - Quality engineer - Design or stress engineer - Quality manager - Customer representative, if required **Notes:** A starting point, not a controlled form. Use your own document number and revision, and follow your quality manual for who may approve use-as-is or repair dispositions. Customer or regulatory approval is required in many cases, and the contract flow-down decides. ## Content **Intro:** When parts fail to meet the drawing, the material review board decides what happens to them. A good record shows what was wrong, what you propose, why it is safe, and who approved it. This template produces a clean disposition record you can attach to the NCR. **Sections:** #### How to use it **Body:** Fill in the part, quantity, lot and nonconformance description with measured values against the requirement. Choose the disposition, say whether customer approval is needed and write the technical justification. The document includes a containment table and signature lines, and exports to PDF or Word for your records. **Bullets:** - State actual and required values, not just out of tolerance. - Link the CMM or inspection report. - Keep suspect lots quarantined until the record is signed. #### Disposition choices **Body:** Use as is accepts the part with the nonconformance, which normally needs engineering justification and often customer approval. Repair brings the part to an acceptable but different condition from the drawing, using a method that may need approval. Rework returns it to the drawing requirement using a standard process. Scrap and return to supplier remove it from the flow. AS9100 requires these decisions to be controlled and recorded. #### Common mistakes **Body:** Dispositions approved by someone without the authority, a thin justification, no containment of related lots, and no link to corrective action. The record should answer the question an auditor will ask: how do you know no other product is affected? If the cause is not confirmed, say so and plan the next step. **Cta:** If NCRs, MRB records and rework orders live in different systems, we can help connect them to your ERP so each disposition is traceable to a lot and work order. **Faq:** #### What does MRB stand for? **Answer:** Material review board. It is a cross-functional group, usually quality, engineering and sometimes the customer, that decides how to handle nonconforming product and records the disposition and justification. #### Is customer approval always needed? **Answer:** No. Many contracts let the supplier rework to drawing or scrap on its own authority, but use-as-is and repair dispositions often need customer approval. The purchase order flow-down and the contract decide. #### What is the difference between repair and rework? **Answer:** Rework returns the part to the original drawing requirement, while repair leaves it in a condition that differs from the drawing but is accepted for use. Repair typically needs a documented, approved method. #### Does this replace my NCR form? **Answer:** No. The NCR captures the finding and the MRB record captures the decision. Link them by number so an auditor can follow a nonconformance from detection to closure. ## Search terms MRB disposition template, material review board form, nonconformance disposition record, use as is repair scrap form, AS9100 nonconforming product template, MRB report template, NCR disposition form aerospace, customer concession request --- Talk to an engineer: https://netray.co/contact?intent=erp_ai | Machine catalog: https://netray.co/agent/catalog.json