# Tooling Cavity Count Calculator for Launch Capacity

> Source: https://netray.co/tools/apqp-tooling-cavity-count-calculator
> Publisher: Netray (netray.co), AI and integration engineering for ERP and manufacturing systems.
> Section: Free Tools

## Short answer

Size the number of cavities per tool from annual demand, peak factor, cycle time, OEE and available hours before you commit to a tooling quote.

## Category

engineering-plm

## Industry

Automotive

## Audience

- APQP team leader
- Tooling engineer
- Program manager

## Tool

**Kind:** calculator

**Inputs:**

#### Annual customer demand

**Key:** annual

**Type:** number

**Default:** 600000

**Min:** 0

**Step:** 10000

**Unit:** parts

**Help:** Peak annual volume from the quote or program release.

#### Operating days per year

**Key:** days

**Type:** number

**Default:** 240

**Min:** 1

**Max:** 365

**Step:** 1

**Unit:** days

#### Peak demand factor

**Key:** peak

**Type:** number

**Default:** 1.15

**Min:** 1

**Step:** 0.01

**Help:** Customer flex above the average, for example 1.15 for 15 percent above plan.

#### Shifts per day

**Key:** shifts

**Type:** number

**Default:** 2

**Min:** 1

**Max:** 4

**Step:** 1

#### Scheduled hours per shift

**Key:** hours

**Type:** number

**Default:** 7.5

**Min:** 1

**Max:** 12

**Step:** 0.5

**Unit:** hours

#### Expected OEE

**Key:** oee

**Type:** slider

**Default:** 80

**Min:** 40

**Max:** 95

**Step:** 1

**Unit:** %

**Help:** Availability x performance x quality for this press or line.

#### Cycle time per shot or stroke

**Key:** cycle

**Type:** number

**Default:** 40

**Min:** 1

**Step:** 1

**Unit:** sec

#### Parts per cavity per shot

**Key:** per_shot

**Type:** number

**Default:** 1

**Min:** 1

**Step:** 1

**Outputs:**

#### Peak daily demand

**Key:** daily

**Expr:** annual / days * peak

**Format:** integer

#### Productive seconds per day

**Key:** avail

**Expr:** shifts * hours * 3600 * oee / 100

**Format:** integer

#### Parts per cavity per day

**Key:** per_cav

**Expr:** avail / cycle * per_shot

**Format:** integer

#### Cavities required (exact)

**Key:** cav_exact

**Expr:** daily / per_cav

**Format:** decimal

**Primary:** true

#### Cavities to specify (rounded up)

**Key:** cav

**Expr:** ceil(cav_exact)

**Format:** integer

**Primary:** true

**Description:** Round to a practical mold layout, often a multiple of 2 for balanced runners.

#### Capacity utilization at that count

**Key:** util

**Expr:** cav_exact / cav * 100

**Format:** percent

**Description:** Above about 90 percent leaves little room for recovery, scrap or a second tool.

**Chart:**

#### Cavities required vs OEE

**Type:** line

**X:** oee

**From:** 50

**To:** 95

**Steps:** 19

**Series:**

- cav_exact

**Disclaimer:** Planning estimate. Ignores scrap on startup, color or material changes and tool maintenance windows beyond what the OEE already covers.

## Content

**Intro:** Cavity count is one of the first irreversible decisions in APQP. Too few and you cannot meet run-at-rate; too many and you pay for an oversized tool and a bigger press. This calculator converts demand, calendar and OEE into the number of cavities that actually closes the gap.

**Sections:**

#### How to use it

**Body:** Start with peak annual volume from the nomination. Set operating days, shifts and hours exactly as the plant will run at launch, not the ideal. Apply a peak factor for customer flex and an OEE you can defend from similar jobs on the same press. Enter the cycle time from the mold supplier's estimate, and parts per shot per cavity if the tool is a family or multi-impression. Read cavities required, then decide whether to round up, add a second tool or add a shift.

#### The math

**Body:** Peak daily demand equals annual demand divided by operating days, times the peak factor. Productive seconds per day equal shifts times hours times 3600 times OEE. One cavity yields productive seconds divided by cycle time, multiplied by parts per shot. Cavities required is daily demand divided by that yield. Rounding up gives the integer count and utilization shows how much headroom remains. The same logic applies to stamping dies, die cast tools and any multi-impression process.

#### Interpreting the sweep

**Body:** The chart shows cavities needed across a range of OEE. Because OEE sits in the denominator, the curve steepens at low values: a drop from 80 to 60 percent raises the requirement by a third. If your result flips between two integer counts across the realistic OEE range, that is the signal to build in margin or confirm the OEE assumption before releasing tool money.

#### Common mistakes

**Body:** Using average rather than peak demand is the classic one. Others are using nameplate cycle time that ignores robot take-out and cooling for thick sections, assuming 24/7 operation when the plant runs five days, and forgetting that PPAP samples and run-at-rate need to be produced on production tooling at the planned cavity count. Also remember that customers often ask for more than one cavity to be proven, so include all cavities in the submission.

**Cta:** Netray can help connect capacity assumptions like these to routing and work center data in your ERP, so launch planning is based on real run rates.

**Faq:**

#### What OEE should I use for a new tool?

**Answer:** Use actual OEE from similar parts on the same press if you have it. For a brand-new program, many plants plan 70 to 85 percent and revise after the run-at-rate. Avoid world-class figures in capacity planning.

#### Does this work for stamping?

**Answer:** Yes, replace cycle time with strokes per minute converted to seconds per stroke and parts per shot with parts per stroke. Coil changes and die changes should sit inside the OEE.

#### Should I round up or add a second tool?

**Answer:** If utilization at the rounded count exceeds about 90 percent, or the tool is a long-lead item with no backup, a second tool or extra shift is usually safer than relying on a perfect launch.

#### How does this relate to run at rate?

**Answer:** Run at rate demonstrates the planned production rate with production tooling and people. This calculator sets the cavity count that makes that planned rate achievable in the first place.

## Search terms

how many cavities do i need, injection mold cavity calculator, cavity count calculation, tooling capacity planning, apqp capacity planning, mold cavitation calculator, die cavity count, launch capacity calculator

---
Talk to an engineer: https://netray.co/contact?intent=erp_ai | Machine catalog: https://netray.co/agent/catalog.json