# Corrective Action Form Template (PDF) for Manufacturing, with Example

> Source: https://netray.co/tools/corrective-action-form-template-pdf
> Publisher: Netray (netray.co), AI and integration engineering for ERP and manufacturing systems.
> Section: Free Tools

## Short answer

A fill-in corrective action form with a pre-filled manufacturing example. Edit the fields, then export a clean PDF, Word or Excel copy.

## Category

quality

## Industry

Discrete Manufacturing

## Audience

- Quality manager
- QA engineer
- Quality technician

## Tool

**Kind:** template

**Output:** document

**Fields:**

#### Company

**Key:** company

**Type:** text

**Default:** Acme Precision Ltd

#### Form number

**Key:** car_no

**Type:** text

**Default:** CA-2026-041

#### Linked NCR or complaint

**Key:** ncr_no

**Type:** text

**Default:** NCR-2026-0188

#### Date raised

**Key:** date

**Type:** date

**Default:** 2026-10-12

#### Source

**Key:** source

**Type:** select

**Options:**

- Internal NCR
- Customer complaint
- Supplier reject
- Internal audit
- External audit
- Process monitoring

**Default:** Customer complaint

#### Part number and description

**Key:** part

**Type:** text

**Default:** PN-48213 Valve body, rev C

#### Quantity affected

**Key:** qty

**Type:** text

**Default:** 38 of 400 pieces, lot 4471

#### Problem statement

**Key:** problem

**Type:** textarea

**Default:** Customer found 38 pieces with bore diameter 0.04 mm above upper tolerance at incoming inspection.

#### Containment

**Key:** containment

**Type:** textarea

**Default:** Quarantined lot 4471 and stock on hand. 100% sort completed on WIP. Customer notified, replacement lot shipped after sort.

#### Root cause

**Key:** root_cause

**Type:** textarea

**Default:** Boring tool wear was not detected because the in-process check was every shift, not by tool life. Why 5: no tool-life limit defined in the control plan.

#### Corrective action

**Key:** corrective

**Type:** textarea

**Default:** Set tool-life limit of 400 pieces in the CNC program and add a bore check every 25 parts.

#### Action owner

**Key:** owner

**Type:** text

**Default:** A. Rao, Manufacturing Engineer

#### Due date

**Key:** due

**Type:** date

**Default:** 2026-10-28

#### Effectiveness check

**Key:** verification

**Type:** textarea

**Default:** Review SPC data and NCRs for this characteristic over the next 30 days of production. Zero out-of-tolerance results required.

**Blocks:**

#### Corrective Action Form

**Body:** Company: {{company}}
Form no: {{car_no}}
Linked record: {{ncr_no}}
Date raised: {{date}}
Source: {{source}}

#### 1. Problem description

**Body:** Part: {{part}}
Quantity affected: {{qty}}

{{problem}}

#### 2. Containment

**Body:** {{containment}}

#### 3. Root cause

**Body:** {{root_cause}}

#### 4. Corrective action

**Body:** {{corrective}}

#### 5. Action plan

**Table:**

**Columns:**

- Action
- Owner
- Due date
- Status

**Rows:**

**0:** {{corrective}}

**1:** {{owner}}

**2:** {{due}}

**3:** Open

**0:** Update control plan and work instruction

**0:** Check similar parts and machines (preventive)

#### 6. Verification of effectiveness

**Body:** {{verification}}

Result: ______________________   Date verified: ____________

#### Approvals

**Signatures:**

- Raised by
- Action owner
- Quality manager
- Verified by

**Notes:** The defaults are an illustrative example; replace them with your own data. Retain the form with the linked NCR and any revised documents as objective evidence.

## Content

**Intro:** This corrective action form gives quality teams a clean one-page record from problem to verification, pre-filled with a worked manufacturing example you can overwrite. Edit the fields and export to PDF, Word or Excel.

**Sections:**

#### How to fill in the corrective action form

**Body:** Start with the linked record number so the form can be traced from NCR to closure. State the problem with a part, quantity, where it was found and what was wrong, using measurable terms. Containment describes what you did to protect the customer today. Root cause should go beyond the first answer; use 5 Whys, a fishbone or a fault tree and write the verified cause. Corrective actions fix that cause, and the action plan table assigns each one an owner and due date. The last section is the one auditors read first: how and when you will prove it worked.

**Bullets:**

- Use numbers: 38 of 400 pieces, 0.04 mm over tolerance.
- Separate containment (today) from corrective action (cause).
- Name a person and a date on every action.
- Define the effectiveness measure now, not at closure.

#### Example and procedure

**Body:** The pre-filled example follows a typical machining complaint: oversized bores traced to tool wear with no tool-life limit. The sequence is the standard corrective action procedure used under ISO 9001 clause 10.2, IATF 16949 and AS9100: contain, find cause, act, verify, and update documents such as the control plan, FMEA and work instruction. A short procedure should also say who can raise a form, who approves closure, and the target days for each step so overdue items are escalated.

#### Common mistakes

**Body:** Root cause written as 'operator error' with retraining as the only action, a verification line that says 'monitor', and no link to the original NCR are the three findings seen most often. Another is closing the form when the action is done instead of when it is proven effective. Keep a separate list of open forms so due dates are reviewed in the weekly quality meeting.

**Cta:** If you want forms like this raised and routed automatically from NCR and receiving data in your ERP, Netray can build it as a private AI layer on your own servers with human approval on every record.

**Faq:**

#### What is a corrective action form?

**Answer:** It is the controlled record of a problem, its root cause, the actions taken to prevent recurrence, who owns them and how effectiveness was verified. It supports ISO 9001, IATF 16949, AS9100 and similar quality systems.

#### Can I get this as a PDF or Excel file?

**Answer:** Yes. Fill the fields on the page and export to PDF, Word or Excel. The example text is only a guide and can be overwritten completely.

#### What is the difference between correction and corrective action?

**Answer:** A correction fixes the nonconforming product, for example sorting or reworking it. Corrective action removes the cause so the problem does not return. Both belong on the form but they are different rows.

#### Who should approve closure?

**Answer:** Normally the quality manager or a person independent of the action owner, after reviewing the effectiveness evidence. Customer-specific requirements may add a customer sign-off for complaints.

## Search terms

corrective action form template pdf, corrective action template for manufacturing, corrective action form example, sample corrective action form, corrective action procedure template, cause and corrective action template, corrective action list template, corrective action form manufacturing

---
Talk to an engineer: https://netray.co/contact?intent=erp_ai | Machine catalog: https://netray.co/agent/catalog.json