# Fall Protection Clearance Distance Calculator (Required Fall Clearance)

> Source: https://netray.co/tools/fall-protection-clearance-calculator
> Publisher: Netray (netray.co), AI and integration engineering for ERP and manufacturing systems.
> Section: Free Tools

## Short answer

Work out the required clearance below an anchor for a personal fall arrest system and compare it with the space actually available.

## Category

ehs-workforce

## Industry

Manufacturing

## Audience

- Safety manager
- Maintenance supervisor
- Competent person

## Tool

**Kind:** calculator

**Inputs:**

#### Lanyard length (connector to connector, before deployment)

**Key:** lanyard

**Type:** number

**Default:** 6

**Min:** 0

**Max:** 20

**Step:** 0.25

**Unit:** ft

#### Anchor height above worker's D-ring

**Key:** above

**Type:** number

**Default:** 0

**Min:** 0

**Max:** 20

**Step:** 0.25

**Unit:** ft

**Help:** Zero if the anchor is at D-ring level or below. Overhead anchors cut free fall.

#### Maximum deceleration distance

**Key:** decel

**Type:** number

**Default:** 3.5

**Min:** 0

**Max:** 10

**Step:** 0.25

**Unit:** ft

**Help:** From the manufacturer's label for your absorber. OSHA limits it to 3.5 ft.

#### D-ring shift and harness stretch

**Key:** shift

**Type:** number

**Default:** 1

**Min:** 0

**Max:** 4

**Step:** 0.25

**Unit:** ft

**Help:** Use the harness manufacturer's figure. Many use about 1 ft.

#### D-ring to feet distance

**Key:** feet

**Type:** number

**Default:** 5

**Min:** 3

**Max:** 7

**Step:** 0.25

**Unit:** ft

**Help:** Roughly 5 ft for a standing worker; use actual height.

#### Safety factor

**Key:** safety

**Type:** number

**Default:** 2

**Min:** 0

**Max:** 6

**Step:** 0.25

**Unit:** ft

**Help:** Margin your program requires. Often 2 to 3 ft.

#### Clearance actually available below the anchor

**Key:** available

**Type:** number

**Default:** 18

**Min:** 0

**Max:** 100

**Step:** 0.5

**Unit:** ft

**Help:** Measured from the walking surface to the nearest obstruction or lower level.

**Outputs:**

#### Free fall distance

**Key:** free_fall

**Expr:** max(lanyard - above, 0)

**Format:** decimal

**Description:** OSHA 1926.502(d)(16) limits free fall to 6 ft.

#### Free fall over the 6 ft limit

**Key:** over6

**Expr:** max(free_fall - 6, 0)

**Format:** decimal

#### Required clearance from the D-ring level

**Key:** required

**Expr:** free_fall + decel + shift + feet + safety

**Format:** decimal

**Primary:** true

**Description:** Sum of every component of the fall.

#### Required clearance below anchor

**Key:** required_anchor

**Expr:** required + above

**Format:** decimal

**Description:** Adds the D-ring distance below the anchor if the anchor is overhead.

#### Margin remaining

**Key:** margin

**Expr:** available - required_anchor

**Format:** decimal

**Primary:** true

**Description:** Negative means the system does not fit.

**Chart:**

#### Required clearance by lanyard length

**Type:** line

**X:** lanyard

**From:** 2

**To:** 10

**Steps:** 17

**Series:**

- required
- required_anchor

**Disclaimer:** Estimate for planning only. The competent person must use the manufacturer instructions, the actual anchor and the applicable regulation. Swing fall and sloped surfaces are not included.

## Content

**Intro:** A personal fall arrest system only works if there is enough room below for the worker to stop before reaching a lower level. This calculator adds the components of the fall so the check is done before the job, not after.

**Sections:**

#### How to use it

**Body:** Enter the lanyard length and the height of the anchor relative to the worker's D-ring. A lanyard anchored overhead reduces free fall, while a foot-level anchor increases it. Add the deceleration distance from the absorber label, the harness D-ring shift, the distance from the D-ring to the feet and your safety factor. Then enter the clearance you can measure. The result shows the total required clearance and the margin left or the shortfall.

**Bullets:**

- Use the shortest lanyard that allows the task
- Read deceleration distance from the product label
- Measure from the work surface to the real obstruction

#### What goes into the number

**Body:** Required clearance equals free fall plus deceleration distance plus D-ring shift plus the distance from the D-ring to the worker's feet plus a safety factor. When the anchor is above the D-ring, free fall is shortened and the anchor sits higher than the D-ring, so clearance below the anchor adds that offset. Free fall is limited to 6 ft by OSHA construction standard 1926.502(d)(16), and maximum deceleration distance to 3.5 ft, so a 6 ft lanyard at foot level is already at the limit.

#### Reading the result

**Body:** If the margin is negative, a fall would reach the level below. Options are to raise the anchor, choose a shorter or self-retracting lifeline, change the work position to keep the anchor overhead, or use restraint so a fall cannot occur. The chart shows how steeply required clearance grows with lanyard length, which is why anchor location often matters more than the equipment you buy.

#### Common mistakes

**Body:** Ignoring the worker's own height below the D-ring is the commonest error, followed by forgetting that harness stretch and D-ring shift take real distance. Others include assuming a self-retracting lifeline needs no clearance and using one lanyard rating for every task. Swing falls need a separate analysis, since the path of the fall is not vertical.

**Cta:** If your permit to work and equipment inspection records are scattered across forms and spreadsheets, we can help bring them into your ERP or maintenance system with approval steps.

**Faq:**

#### What is required fall clearance?

**Answer:** It is the vertical distance needed below the anchor or work surface for a worker to be stopped before hitting a lower level. It adds free fall, deceleration distance, harness stretch and D-ring shift, the D-ring to feet distance and a safety factor.

#### What is the maximum free fall distance?

**Answer:** Under OSHA 1926.502(d)(16), personal fall arrest systems must limit free fall to 6 feet, or less if the maximum arresting force would otherwise be exceeded. Some programs and ANSI-based standards require lower limits for specific equipment.

#### Does an overhead anchor change the calculation?

**Answer:** Yes. If the anchor is above the D-ring, free fall is reduced by that height, but the clearance has to be measured below the anchor so the offset is added back. The calculator handles both parts.

#### Can this replace a rescue plan?

**Answer:** No. It only checks clearance. A rescue plan for prompt retrieval of a suspended worker is required separately, because suspension trauma is a risk after the fall is arrested.

## Search terms

fall clearance calculator, fall protection clearance distance, required fall clearance formula, lanyard free fall distance, personal fall arrest system clearance, shock absorbing lanyard deceleration distance, fall arrest calculation, safe working height calculator

---
Talk to an engineer: https://netray.co/contact?intent=erp_ai | Machine catalog: https://netray.co/agent/catalog.json