# Fiber Optic Connector End Face Inspection Log > Source: https://netray.co/tools/fiber-optic-connector-end-face-inspection-log-worksheet > Publisher: Netray (netray.co), AI and integration engineering for ERP and manufacturing systems. > Section: Free Tools ## Short answer Log each connector's end face inspection by zone, count defects and record the disposition. Works for production and field teams. ## Category quality ## Industry Fiber Optics ## Audience - Fiber optic technician - Quality inspector - Cable assembly operator ## Tool **Kind:** worksheet **Mode:** editable **Columns:** #### Date **Key:** date **Type:** date #### Connector / assembly ID **Key:** conn_id **Type:** text #### Connector type **Key:** ctype **Type:** select **Options:** - LC - SC - ST - FC - MPO - E2000 #### Polish **Key:** polish **Type:** select **Options:** - UPC - APC #### Core zone defects **Key:** core_def **Type:** number #### Cladding zone defects **Key:** clad_def **Type:** number #### Core zone scratches **Key:** core_scr **Type:** number #### Total flagged **Key:** total **Type:** number **Expr:** core_def + clad_def + core_scr #### Clean cycles **Key:** clean_cycles **Type:** number #### Result **Key:** result **Type:** select **Options:** - Pass - Fail - re-clean - Fail - re-polish - Fail - scrap #### Inspector **Key:** inspector **Type:** text **Rows:** **Date:** 2026-10-19 **Conn id:** JMP-1042-A **Ctype:** LC **Polish:** UPC **Core def:** 0 **Clad def:** 2 **Core scr:** 0 **Clean cycles:** 1 **Result:** Pass **Inspector:** MK **Date:** 2026-10-19 **Conn id:** JMP-1042-B **Ctype:** LC **Polish:** UPC **Core def:** 1 **Clad def:** 3 **Core scr:** 0 **Clean cycles:** 2 **Result:** Fail - re-clean **Inspector:** MK **Date:** 2026-10-19 **Conn id:** JMP-1043-A **Ctype:** SC **Polish:** APC **Core def:** 0 **Clad def:** 1 **Core scr:** 0 **Clean cycles:** 0 **Result:** Pass **Inspector:** MK **Date:** 2026-10-20 **Conn id:** TRK-0088-A **Ctype:** MPO **Polish:** UPC **Core def:** 0 **Clad def:** 4 **Core scr:** 1 **Clean cycles:** 2 **Result:** Fail - re-polish **Inspector:** SD **Totals:** #### Total flagged defects **Key:** total **Agg:** sum **Format:** integer #### Connectors inspected **Key:** conn_id **Agg:** count **Format:** integer **Summary:** #### Average flagged per connector **Key:** avg_flag **Expr:** sum_total / count **Format:** decimal **Notes:** Pass and fail limits depend on the IEC 61300-3-35 grade or the customer specification in force. This log records counts and disposition, so apply your own acceptance table when choosing the result. ## Content **Intro:** Dirty or damaged end faces cause most fiber link problems. This log records what the inspection scope showed on each connector so you can prove the end face was checked and spot trends by operator or process. **Sections:** #### How to use the log **Body:** Inspect each connector with a video microscope or inspection probe before mating and after final polish. Record the zone counts, number of clean cycles you needed, and the disposition. The worksheet adds up flagged items per connector and shows an average, which is a quick way to see whether a batch or shift is drifting. Export to Excel for the build record. **Bullets:** - Inspect, clean, inspect again: log the final state - Record both ends of an assembly as separate rows - Use the same ID as the traveler or test record #### The zone approach **Body:** Acceptance standards such as IEC 61300-3-35 divide the end face into concentric zones: core, cladding, adhesive and contact. The tightest limits apply at the core, where any defect directly attenuates the signal, and limits relax toward the outer zones. Specific counts and sizes depend on the grade and connector type, so take them from the standard or your customer drawing and do not rely on a generic number. #### Reading the results **Body:** A rising count of re-clean failures usually points to contaminated dust caps, poor cleaning technique, or environmental dust. A rising count of re-polish failures points to the polishing film, cure, or fixture. Track results by operator and by lot, then correct the process rather than only reworking parts. Scratches in the core zone almost always mean re-polish rather than re-clean. #### Common mistakes **Body:** Cleaning without inspecting first, inspecting once and never after cleaning, and inspecting only one end of a jumper. Also avoid cleaning an APC connector with a wipe that drags debris across the angled face, and never look into a live fiber with a microscope that is not filtered. Disconnect the source before inspection. **Cta:** If inspection results should post into your quality module or NCR workflow, we can help connect the log to your ERP. **Faq:** #### What are the pass limits for end face defects? **Answer:** They come from IEC 61300-3-35 for the connector grade, or from your customer's specification. Limits differ by zone and by single mode or multimode. Put your acceptance criteria in a controlled work instruction and use this log to record results. #### Do I need to inspect new connectors? **Answer:** Yes. Factory caps do not guarantee a clean end face, and contamination from the cap or packaging is common. Inspect before first mating even on new patch cords. #### How often should I inspect during field work? **Answer:** Inspect before every mating of a connector that is critical to the link, and after any cleaning. Many contractors make this a contract requirement and attach the log to the handover pack. #### Can I store inspection images? **Answer:** This worksheet records counts and results only. Save probe images in your own document system using the connector ID as the file name, so each row can be matched to its image. ## Search terms fiber end face inspection log, connector inspection record, IEC 61300-3-35 inspection log, fiber connector cleanliness log, fiber inspection scope record, end face defect log excel, fiber connector inspection checklist, fiber connector visual inspection form --- Talk to an engineer: https://netray.co/contact?intent=erp_ai | Machine catalog: https://netray.co/agent/catalog.json