# PON Splitter Loss and Optical Power Budget Calculator

> Source: https://netray.co/tools/fiber-optic-pon-splitter-power-budget-calculator
> Publisher: Netray (netray.co), AI and integration engineering for ERP and manufacturing systems.
> Section: Free Tools

## Short answer

Work out received power and margin on a passive optical network for a given splitter ratio, fiber length, connectors and splices.

## Category

industry-templates

## Industry

Fiber Optics

## Audience

- Fiber optic engineer
- FTTH designer
- Outside plant engineer

## Tool

**Kind:** calculator

**Inputs:**

#### OLT transmit power

**Key:** tx

**Type:** number

**Default:** 3

**Step:** 0.5

**Unit:** dBm

**Help:** Launch power of the OLT optic. GPON Class B+ optics are typically specified around +1.5 to +5 dBm.

#### ONT receiver sensitivity

**Key:** sens

**Type:** number

**Default:** -27

**Step:** 0.5

**Unit:** dBm

**Help:** Minimum receive power at the ONT per its datasheet. Class B+ is -27 dBm.

#### Splitter ratio (1:N)

**Key:** split

**Type:** select

**Default:** 32

**Options:**

##### 1:2

**Value:** 2

##### 1:4

**Value:** 4

##### 1:8

**Value:** 8

##### 1:16

**Value:** 16

##### 1:32

**Value:** 32

##### 1:64

**Value:** 64

#### Splitter excess loss

**Key:** excess

**Type:** number

**Default:** 1.5

**Min:** 0

**Step:** 0.1

**Unit:** dB

**Help:** Loss above the ideal 10 x log10(N). Take it from the splitter datasheet; planar splitters are commonly 0.5 to 2 dB depending on ratio.

#### Fiber length (OLT to ONT)

**Key:** length

**Type:** slider

**Default:** 10

**Min:** 0

**Max:** 30

**Step:** 0.5

**Unit:** km

#### Fiber attenuation

**Key:** att

**Type:** number

**Default:** 0.35

**Min:** 0

**Step:** 0.01

**Unit:** dB/km

**Help:** Use the worst case for the downstream wavelength, for example 0.35 dB/km at 1310 nm or 0.25 dB/km at 1490 nm.

#### Connector pairs

**Key:** nconn

**Type:** number

**Default:** 4

**Min:** 0

**Step:** 1

**Unit:** pairs

#### Loss per connector pair

**Key:** lconn

**Type:** number

**Default:** 0.3

**Min:** 0

**Step:** 0.05

**Unit:** dB

#### Fusion splices

**Key:** nsplice

**Type:** number

**Default:** 6

**Min:** 0

**Step:** 1

**Unit:** splices

#### Required design margin

**Key:** reqmargin

**Type:** number

**Default:** 3

**Min:** 0

**Step:** 0.5

**Unit:** dB

**Outputs:**

#### Splitter loss

**Key:** splitloss

**Expr:** 10 * log10(split) + excess

**Format:** decimal

**Description:** Ideal split loss plus excess loss, in dB.

#### Fiber loss

**Key:** fiberloss

**Expr:** length * att

**Format:** decimal

#### Connector loss

**Key:** connloss

**Expr:** nconn * lconn

**Format:** decimal

#### Splice loss

**Key:** spliceloss

**Expr:** nsplice * 0.1

**Format:** decimal

**Description:** Planned at 0.1 dB per fusion splice.

#### Total link loss

**Key:** total

**Expr:** splitloss + fiberloss + connloss + spliceloss

**Format:** decimal

**Primary:** true

#### Received power at ONT

**Key:** rx

**Expr:** tx - total

**Format:** decimal

#### Margin above sensitivity

**Key:** margin

**Expr:** rx - sens

**Format:** decimal

**Primary:** true

**Description:** Should be at least the required design margin.

#### Maximum reach at required margin

**Key:** maxlen

**Expr:** max(0, (tx - sens - reqmargin - splitloss - connloss - spliceloss) / att)

**Format:** decimal

**Description:** Fiber length in km that uses the whole budget.

**Chart:**

#### Margin above sensitivity vs fiber length (dB)

**Type:** line

**X:** length

**From:** 0

**To:** 30

**Steps:** 30

**Series:**

- margin

**Disclaimer:** Planning estimate. Confirm with the OLT and ONT optic datasheets for the exact PON class, wavelengths and aging margin, and verify the as-built link with a power meter or OTDR.

## Content

**Intro:** A passive optical network divides one OLT port among many subscribers with a splitter, and the splitter is usually the biggest loss in the path. This calculator adds splitter, fiber, connector and splice losses to show received power and the margin left at the ONT.

**Sections:**

#### How to use the calculator

**Body:** Enter the OLT transmit power and the ONT sensitivity from the optic datasheets, then the splitter ratio, excess loss, fiber length and the counts of connector pairs and splices. The tool returns total loss, received power, margin over sensitivity and the maximum reach that still leaves your required design margin. If you use cascaded splitters, run the calculation with the combined ratio and add each stage's excess loss.

**Bullets:**

- Use worst-case attenuation for the wavelength that has the least margin
- Include connectors at patch panels, the splitter cabinet and the ONT
- Keep a design margin for repairs, aging and temperature

#### Formula and reference values

**Body:** An ideal 1:N splitter loses 10 x log10(N) dB, which is 3.01 dB for 1:2, 9.03 dB for 1:8, 15.05 dB for 1:32 and 18.06 dB for 1:64. Real planar lightwave circuit splitters add excess loss, so a 1:32 is commonly quoted near 16.5 to 17.5 dB in total. Total loss is splitter plus length times attenuation plus connectors plus splices, and margin equals transmit power minus total loss minus receiver sensitivity.

#### Worked example

**Body:** With +3 dBm at the OLT, a 1:32 splitter at 1.5 dB excess (16.55 dB), 10 km at 0.35 dB/km (3.5 dB), four connector pairs at 0.3 dB (1.2 dB) and six splices at 0.1 dB (0.6 dB), the total is 21.85 dB. Received power is -18.85 dBm, which is 8.15 dB above a -27 dBm sensitivity. After a 3 dB design margin the line can run about 24 km further than planned, but it must also stay under the standard's logical and differential reach limits.

#### Common mistakes

**Body:** Designers often forget the overload limit: a short link with a strong OLT can exceed the ONT's maximum input power, which is around -8 dBm for Class B+. Others use the typical rather than maximum splitter loss, or leave out connector pairs at patch panels. Upstream power also needs checking, since the ONT transmit power is lower than the OLT's, and the upstream wavelength has different attenuation.

**Cta:** Netray can connect your project and asset records to checks like this so design assumptions are tracked against what was built.

**Faq:**

#### What is the loss of a 1:32 splitter?

**Answer:** The ideal figure is 15.05 dB. Real splitters add excess loss, so datasheets usually show about 16.5 to 17.5 dB maximum for a 1:32. Use the worst-case figure on your supplier's datasheet.

#### How much margin should a PON design leave?

**Answer:** Many operators design for 3 dB or more above the receiver sensitivity to cover repair splices, connector cleaning issues and aging. Your operator's engineering standard overrides this default.

#### Does this check the ONT overload level?

**Answer:** No. Compare the received power with the ONT's maximum input power as well, otherwise a short link can saturate the receiver. Fixed attenuators are used when received power is too high.

#### Can I model two cascaded splitters?

**Answer:** Yes. Set the ratio to the combined value, for example 1:4 followed by 1:8 is 1:32, and raise the excess loss to the sum of both stages' excess loss. Add the extra connectors at the cabinet.

## Search terms

pon power budget calculator, gpon splitter loss, splitter loss calculator, 1:32 splitter loss db, ftth link budget, gpon class b+ budget, olt to ont loss, passive optical network loss budget

---
Talk to an engineer: https://netray.co/contact?intent=erp_ai | Machine catalog: https://netray.co/agent/catalog.json