# Final Inspection Checklist Before Shipment > Source: https://netray.co/tools/final-inspection-checklist > Publisher: Netray (netray.co), AI and integration engineering for ERP and manufacturing systems. > Section: Free Tools ## Short answer A pre-shipment checklist covering records, measurements, function, appearance, labeling, packing and release authorization. ## Category quality ## Industry Discrete Manufacturing ## Audience - Final inspector - Quality manager - Shipping supervisor - Quality engineer ## Tool **Kind:** checklist **Groups:** #### 1. Order and record review **Items:** **Text:** Work order, quantity and part number match the customer order or shipping instruction **Critical:** true **Text:** Drawing or specification revision used matches the order **Critical:** true All operations on the routing are signed off complete In-process inspection records and first piece approvals are attached **Text:** No open nonconformance reports or holds against the lot **Critical:** true **Text:** Required first article inspection or customer approval is on file **Critical:** true Material and special process certificates are present and traceable to the lot #### 2. Dimensional and functional verification **Items:** **Text:** Sampling plan or 100 percent inspection requirement is identified **Critical:** true **Text:** Key and critical characteristics are measured and recorded **Critical:** true **Text:** Gages and equipment used are in calibration **Critical:** true Fit, form and function tests are completed to the test procedure Electrical, leak, torque, pressure or load tests are completed where required Test results are within limits and attached to the record Software or firmware version is verified where applicable #### 3. Appearance and workmanship **Items:** Surface finish, plating, paint or coating meet the specification No scratches, dents, burrs, sharp edges or contamination beyond accept limits Parts are clean and free of cutting fluid, chips and foreign material Workmanship meets the applicable standard, such as IPC-A-610 for electronics assemblies Color and appearance match the approved sample Corrosion protection is applied where specified #### 4. Marking, labeling and documentation **Items:** **Text:** Part marking, serial numbers and date codes match the records **Critical:** true Labels show correct part number, revision, quantity and lot **Text:** Certificate of conformance is completed and signed **Critical:** true Customer-specific labels or barcodes are scanned and verified Required export, origin or regulatory markings are present Serial number and traceability records are complete and legible #### 5. Packing, release and records **Items:** Packaging method matches the customer specification and protects the product Quantity in each box matches the packing list ESD, moisture, VCI or other protection is applied where required Packing list and shipping documents match the contents **Text:** Final inspection record is signed and dated by the inspector **Critical:** true Product is released in the ERP and moved to finished goods or shipping status Retention samples, records and photographs are filed as required **Scoring Note:** Do not ship until every critical item is yes. A no on any critical item means the lot is on hold until corrected or until a documented customer deviation is approved. ## Content **Intro:** Final inspection is the last gate before the customer receives the product. It confirms that the right parts, to the right revision, with the right records and labels, are leaving the building. **Sections:** #### How to use the checklist **Body:** Walk the five groups in order: records, measurements and tests, appearance, labeling and packing. Tick each item and treat a no on any critical item as a hold. Export the checked list to PDF or Excel and attach it to the shipment record. Add customer-specific requirements from the purchase order or quality agreement, and delete items that do not apply to your product. The checklist works for machined parts, fabricated assemblies and electronics, but it needs your own acceptance criteria. **Bullets:** - Review the records before touching the product. - Inspect to the drawing revision on the order, not the one in the folder. - Do not combine two orders in one inspection record. #### Record review is half the job **Body:** A product can be physically perfect and still not be shippable. Missing certificates, an unsigned operation, an open nonconformance or the wrong revision are among the most common causes of customer rejections and audit findings. In aerospace and defense, the customer may require traceability from the finished item to the material lot, special process certificates and calibration records. Verify these links before packaging so a gap can be fixed without unpacking. #### Sampling or 100 percent **Body:** The control plan or customer contract decides whether final inspection is by sampling or by 100 percent. Safety critical or contractual characteristics are often checked on every unit, while others use a sampling plan such as ANSI/ASQ Z1.4. Where a customer requires zero defects in a class, a sampling plan with an acceptance number of zero is the usual approach. Document the plan used on the final inspection record. #### Common mistakes **Body:** Frequent errors include inspecting before the last operation is complete, checking against an older revision, releasing in the ERP before the physical inspection is signed, and shipping with the certificate signed by someone not authorized. Another is skipping packaging checks. Damage in transit is still a quality escape in the customer's eyes, so verify protection and labels before the pallet is closed. **Cta:** If release in your ERP is not tied to a completed inspection record, we can discuss how to make shipment depend on a signed final inspection. **Faq:** #### What is the purpose of final inspection? **Answer:** It verifies that finished product meets customer and internal requirements before shipment, and that the supporting records are complete. It is a safety net, not a substitute for controlling quality in the process, since finding defects at the end is the most expensive point. #### How is final inspection different from outgoing inspection? **Answer:** The terms are often used interchangeably. Final inspection is usually the last quality check on the finished product, and outgoing or pre-shipment inspection may include extra checks on packing, labeling and quantity just before dispatch. Define the scope in your procedure. #### Do I need a signed certificate of conformance? **Answer:** Many customers and industries require it, particularly aerospace, defense and medical. The certificate states that product meets the order and should reference the PO, part number, revision and lot or serial numbers. It should be signed by an authorized person named in your quality system. #### What if a customer requires its own inspection report? **Answer:** Use their format when specified and keep a copy with your records. This checklist can still be used internally to verify that everything required is complete before the customer-specific report is issued and signed. ## Search terms final inspection checklist, final product inspection checklist, pre shipment inspection checklist, final quality inspection form, outgoing inspection checklist, finished goods inspection checklist, fqc checklist, final inspection report --- Talk to an engineer: https://netray.co/contact?intent=erp_ai | Machine catalog: https://netray.co/agent/catalog.json