# Turning Insert Tool Life and Tool Cost per Part Calculator

> Source: https://netray.co/tools/turning-insert-tool-life-cost-per-part-calculator
> Publisher: Netray (netray.co), AI and integration engineering for ERP and manufacturing systems.
> Section: Free Tools

## Short answer

Applies the Taylor tool life equation to show how cutting speed changes tool life, tooling cost per part, tool change cost and total cost per part.

## Category

mes-shop-floor

## Industry

Precision Machining

## Audience

- Process engineer
- CNC programmer
- Manufacturing engineer

## Tool

**Kind:** calculator

**Currency:** $

**Inputs:**

#### Cutting speed to evaluate

**Key:** v

**Type:** slider

**Default:** 500

**Min:** 150

**Max:** 900

**Step:** 10

**Unit:** SFM

#### Reference cutting speed

**Key:** vref

**Type:** number

**Default:** 400

**Min:** 50

**Step:** 10

**Unit:** SFM

**Help:** The speed at which you know the tool life.

#### Tool life at reference speed

**Key:** tref

**Type:** number

**Default:** 30

**Min:** 1

**Step:** 1

**Unit:** min

**Help:** Minutes of cutting per edge until the wear limit is reached.

#### Taylor exponent n

**Key:** n

**Type:** select

**Default:** 0.25

**Options:**

##### High speed steel, about 0.125

**Value:** 0.125

##### Carbide, about 0.25

**Value:** 0.25

##### Coated carbide, about 0.35

**Value:** 0.35

##### Ceramic, about 0.6

**Value:** 0.6

**Help:** Typical textbook ranges. Fit your own value from two tool life tests when possible.

#### Cutting time per part at reference speed

**Key:** tc_ref

**Type:** number

**Default:** 0.8

**Min:** 0.01

**Step:** 0.05

**Unit:** min

#### Insert price

**Key:** insert

**Type:** number

**Default:** 14

**Min:** 0

**Step:** 0.5

**Unit:** $/insert

#### Usable edges per insert

**Key:** edges

**Type:** select

**Default:** 2

**Options:**

##### 1 edge

**Value:** 1

##### 2 edges

**Value:** 2

##### 3 edges

**Value:** 3

##### 4 edges

**Value:** 4

##### 6 edges

**Value:** 6

##### 8 edges

**Value:** 8

#### Tool change time

**Key:** chg

**Type:** number

**Default:** 1.5

**Min:** 0

**Step:** 0.5

**Unit:** min

**Help:** Machine downtime to index or replace the insert and re-check size.

#### Machine plus operator rate

**Key:** rate

**Type:** number

**Default:** 107

**Min:** 0

**Step:** 1

**Unit:** $/hr

**Outputs:**

#### Tool life at this speed

**Key:** life

**Expr:** tref * pow(vref / v, 1 / n)

**Format:** minutes

**Description:** Taylor equation V x T^n = C solved for T at the chosen speed.

#### Cutting time per part

**Key:** cut

**Expr:** tc_ref * vref / v

**Format:** minutes

**Description:** Cutting time scales inversely with speed for the same path.

#### Parts per edge

**Key:** ppe

**Expr:** life / cut

**Format:** decimal

#### Cost per edge

**Key:** edge_cost

**Expr:** insert / edges

**Format:** currency

#### Insert cost per part

**Key:** tool_pp

**Expr:** edge_cost / ppe

**Format:** currency

#### Tool change cost per part

**Key:** chg_pp

**Expr:** chg / 60 * rate / ppe

**Format:** currency

#### Cutting cost per part

**Key:** mach_pp

**Expr:** cut / 60 * rate

**Format:** currency

#### Total cost per part

**Key:** total

**Expr:** tool_pp + chg_pp + mach_pp

**Format:** currency

**Primary:** true

**Chart:**

#### Cost per part vs cutting speed

**Type:** line

**X:** v

**From:** 150

**To:** 900

**Steps:** 40

**Series:**

- total
- tool_pp
- mach_pp

**Disclaimer:** The Taylor equation is an empirical model valid near the tested speed range. Feed, depth of cut, coolant and workpiece hardness also change tool life. Validate the optimum on the machine before changing production speeds.

## Content

**Intro:** Cutting faster shortens the cycle but wears out inserts sooner. This calculator uses the Taylor tool life equation to show the speed where machining cost plus tooling cost per part is lowest.

**Sections:**

#### How to use it

**Body:** Enter a reference speed and the tool life you observe at that speed, the Taylor exponent for your tool material, cutting time per part and insert price. Choose the edges per insert, the tool change time and your machine plus operator rate. Move the speed slider or read the chart: it plots total cost per part, insert cost per part and cutting cost per part across speeds. The lowest point of the total curve is the economic cutting speed for these inputs.

**Bullets:**

- Use observed life at a known speed, not a catalog claim.
- Count only usable edges, not the nominal number printed on the box.
- Include the time to re-check size after an insert change.

#### The equations

**Body:** Taylor's tool life equation is V times T to the power n equals a constant, so tool life at a new speed equals the reference life times the reference speed divided by the new speed, raised to the power one over n. Cutting time per part scales as the reference time times reference speed divided by the new speed. Insert cost per part equals cost per edge divided by parts per edge. Tool change cost equals change time times the rate divided by parts per edge. Machining cost equals cutting time times the rate.

#### Reading the chart

**Body:** As speed rises, cutting cost falls slowly while insert and tool change cost rise steeply because life falls with a power of one over n. With n near 0.25, a 25 percent speed increase cuts tool life to about 40 percent. The total curve is a shallow valley. Running a little below the minimum is cheap insurance, because the curve is flatter on the low side and tool failure costs scrap and downtime that the model does not include.

#### Common mistakes

**Body:** Using a single exponent for every material and coating overstates accuracy, so test two speeds when the job is large. Ignoring tool change time makes high-speed running look better than it is. Forgetting the fixed part of the cycle is a subtle error: non-cutting time does not shrink with speed, so the real savings from speed are smaller than the cutting time suggests. Record insert usage against jobs in your ERP or tool crib system so actual tooling cost can replace estimates.

**Cta:** If tooling cost is estimated rather than measured, Netray can help connect tool crib issues and job data in your ERP to actual tooling cost per part.

**Faq:**

#### What is the Taylor tool life equation?

**Answer:** It is V times T to the power n equals C, where V is cutting speed, T is tool life in minutes, and n and C depend on the tool and workpiece materials. It was published by F. W. Taylor and remains the standard first model for tool life.

#### What exponent n should I use?

**Answer:** Textbook values are about 0.1 to 0.15 for high speed steel, 0.2 to 0.4 for carbide and 0.5 to 0.7 for ceramic. Where possible, calculate n from tool life measured at two speeds on your own material.

#### Why is the lowest cost speed not the fastest speed?

**Answer:** Because the tool wears out faster as speed rises. Beyond a point, the extra insert cost and change downtime outweigh the cutting time saved. The economic speed sits where these costs balance.

#### Should I run at maximum production rate instead?

**Answer:** When the machine is the bottleneck and capacity is worth more than the rate used here, a higher speed can be justified. Raise the machine rate input to reflect the value of capacity and the optimum moves higher.

## Search terms

tool life cost per part calculator, taylor tool life equation calculator, insert cost per part, optimum cutting speed cost, tooling cost per part turning, carbide insert cost per edge, tool change cost machining, economic cutting speed

---
Talk to an engineer: https://netray.co/contact?intent=erp_ai | Machine catalog: https://netray.co/agent/catalog.json