# Turning Tool Wear Cost per Part Calculator > Source: https://netray.co/tools/turning-tool-wear-cost-per-part-calculator > Publisher: Netray (netray.co), AI and integration engineering for ERP and manufacturing systems. > Section: Free Tools ## Short answer Use Taylor tool life, insert price and tool change time to get wear cost per part and find the speed that minimizes total cost. ## Category mes-shop-floor ## Industry CNC Machining ## Audience - Manufacturing engineer - CNC programmer - Estimator ## Tool **Kind:** calculator **Currency:** $ **Inputs:** #### Cutting speed **Key:** v **Type:** slider **Default:** 450 **Min:** 150 **Max:** 900 **Step:** 10 **Unit:** SFM **Help:** Surface feet per minute at the workpiece. #### Taylor constant C **Key:** taylor_c **Type:** number **Default:** 1000 **Min:** 1 **Step:** 25 **Unit:** SFM **Help:** Speed that gives 1 minute tool life for this tool and material pair. Get it from tooling vendor data or your own wear tests. #### Taylor exponent n **Key:** taylor_n **Type:** number **Default:** 0.25 **Min:** 0.05 **Max:** 1 **Step:** 0.01 **Help:** Typical ranges: about 0.1 to 0.15 for HSS, 0.2 to 0.4 for carbide, 0.4 to 0.6 for ceramics. #### Share of Taylor life used **Key:** usage **Type:** slider **Default:** 80 **Min:** 30 **Max:** 100 **Step:** 1 **Unit:** % **Help:** Safety factor so inserts are indexed before failure. #### Workpiece diameter **Key:** dia **Type:** number **Default:** 2 **Min:** 0.1 **Step:** 0.1 **Unit:** in #### Total tool travel in cut per part **Key:** len **Type:** number **Default:** 12 **Min:** 0.1 **Step:** 0.5 **Unit:** in **Help:** Sum of all passes' cut length. #### Feed per revolution **Key:** feed **Type:** number **Default:** 0.012 **Min:** 0.001 **Step:** 0.001 **Unit:** in/rev #### Insert cost **Key:** insert_cost **Type:** number **Default:** 11.5 **Min:** 0 **Step:** 0.5 **Unit:** $ #### Usable cutting edges per insert **Key:** edges **Type:** number **Default:** 2 **Min:** 1 **Step:** 1 **Unit:** edges #### Time to index an edge **Key:** tc_min **Type:** number **Default:** 1.5 **Min:** 0 **Step:** 0.25 **Unit:** min **Help:** Includes stopping, indexing, touch-off and first-part check. #### Machine rate **Key:** rate **Type:** number **Default:** 90 **Min:** 0 **Step:** 5 **Unit:** $/hr **Outputs:** #### Spindle speed **Key:** rpm **Expr:** 12 * v / (pi * dia) **Format:** integer **Description:** N = 12 x V / (pi x D) with V in SFM and D in inches. #### Cutting time per part **Key:** cut_min **Expr:** len / (feed * rpm) **Format:** minutes #### Usable tool life per edge **Key:** life **Expr:** pow(taylor_c / v, 1 / taylor_n) * usage / 100 **Format:** minutes **Description:** From V x T^n = C, so T = (C / V)^(1/n), scaled by the share used. #### Parts per edge **Key:** parts_edge **Expr:** life / cut_min **Format:** decimal #### Insert cost per part **Key:** insert_pc **Expr:** insert_cost / edges * cut_min / life **Format:** currency #### Tool change cost per part **Key:** change_pc **Expr:** tc_min / 60 * rate * cut_min / life **Format:** currency #### Tool wear cost per part **Key:** wear_pc **Expr:** insert_pc + change_pc **Format:** currency **Primary:** true #### Cutting cost per part **Key:** cut_cost **Expr:** cut_min / 60 * rate **Format:** currency #### Cutting plus wear cost per part **Key:** total_pc **Expr:** cut_cost + wear_pc **Format:** currency **Primary:** true **Chart:** #### Cost per part vs cutting speed **Type:** line **X:** v **From:** 150 **To:** 900 **Steps:** 40 **Series:** - total_pc - wear_pc **Disclaimer:** Taylor constants are empirical and vary by insert grade, geometry, coolant and workpiece hardness. Use vendor data or your own tests. The model assumes steady cutting and does not include interrupted cut shock, built-up edge or insert breakage. ## Content **Intro:** Higher cutting speed shortens the cut but burns inserts faster. The balance point is where cutting cost plus tool wear cost per part is lowest. This calculator uses Taylor's tool life equation to find it for your own insert, material and machine rate. **Sections:** #### How to use the calculator **Body:** Enter the cutting speed and the Taylor constants for your tool and material. If you do not have constants, use vendor tool life charts or run two wear tests at different speeds and solve for C and n. Add the workpiece diameter, total cut length per part and feed per revolution. Insert cost, number of usable edges, the time to index an edge and your machine rate complete the picture. The result shows tool life, parts per edge, and cost per part for inserts and tool changes. The chart sweeps speed to reveal the cost-minimizing region. **Bullets:** - Apply the safety factor so you do not run to failure - Use the usable edges number the geometry really supports, not the maximum on the box - Do not exceed the insert grade's recommended speed range #### The Taylor equation and cost model **Body:** Taylor's equation states V x T^n = C, where V is cutting speed, T is tool life in minutes, and n and C are empirical constants. Rearranged, T = (C / V)^(1/n). Spindle speed is N = 12 V / (pi D) in rpm for SFM and inch units, and cutting time is length divided by feed per revolution times rpm. Insert cost per part is insert cost divided by edges, times the fraction of one tool life consumed by one part. Tool change cost is index time times machine rate, charged the same way. The minimum of the total cost curve is the classic economic cutting speed. #### Reading the result **Body:** With the defaults, tool life at 450 SFM is about 24 minutes before the safety factor and about 19.5 minutes after it. A part cuts in around 1.1 minutes, so each edge yields about 18 parts. Wear cost is only a few percent of the total, which shows why raising speed often pays until life collapses. The chart typically falls, bottoms out and rises: the left side wastes machine time and the right side wastes inserts. In production, choose a speed slightly below the cost minimum to protect process stability and part finish. #### Common mistakes **Body:** Using one constant set for every material and grade is the biggest error, because C and n shift widely. Another is ignoring tool change time, which matters in high-volume work. Quoting also tends to forget tool wear on hard materials, where tool cost can rival machine cost. Remember this model is for steady turning. Interrupted cuts, scale and hard spots shorten life well below the equation. Always validate with a real tool life test on the first lot. **Cta:** If tool usage and part counts are recorded on the shop floor or in your ERP, Netray can help turn that data into measured tool cost per part for quoting. **Faq:** #### Where do I get Taylor constants? **Answer:** Start with the insert maker's tool life charts, then refine with your own tests. Cut at two speeds, record minutes to a defined flank wear limit, and solve V1 x T1^n = V2 x T2^n = C for n and C. #### Does this work for milling? **Answer:** The Taylor relationship holds for milling, but cutting time and engagement differ. Use the milling cycle time estimator for time per part and enter an equivalent cutting time here by adjusting travel length and feed. #### Is the cost-minimum speed always best? **Answer:** Not necessarily. Surface finish, chip control, machine stability and inventory of tools may favor a slightly lower speed. If the machine is the bottleneck, maximum production speed may exceed the cost minimum. #### Why does tool change cost matter? **Answer:** Every index stops the machine. At 1.5 minutes and 90 dollars per hour, each change costs about 2.25 dollars, which can exceed the insert edge cost on inexpensive tooling. ## Search terms tool wear cost per part, taylor tool life equation calculator, insert cost per part calculator, tool life cost calculator turning, economic cutting speed calculator, cost per edge carbide insert, tooling cost per part cnc, optimum cutting speed minimum cost --- Talk to an engineer: https://netray.co/contact?intent=erp_ai | Machine catalog: https://netray.co/agent/catalog.json